Web Manager development for WIZnet Serial to Ethernet modules

Introduction

S2E_Webmanager_Overview

WIZnet Serial to Ethernet (S2E) Module provides Serial AT command and configuration tool to monitor and control current mode of the device such as device setting, current running mode and connection status.

To improve the existing module’s control feature, I have proposed ‘Webmanger‘.

With the Webmanager, a user can easily perform monitoring and controling task of an individual (S2E) module where the controlling and monitoring result can be deployed to setup initial values and debug errors.

This is a brief summary of webmanger in prototyping stage and still on a development process. This project is based on HTTP Server library in WIZnet.

 

I’ve posted at Instructables.

http://www.instructables.com/id/Web-Manager-development-for-WIZnet-Serial-to-Ether/

 

 

Step 1: S2E Concept

S2E_Overview

WIZ107SR_configuration_tool

S2E?

Serial to Ethernet (S2E) module is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to a serial equipment.

Currently, WIZnet provides the following two method for setting up the S2E products.

  • Serial AT commands
  • Configuration tool program (figure above)

 

 

Step 2. Parts

w5500_side WIZ550web_board

 

 

 

 

 

 

 

 

I was made a development environments for the demonstration. This evaluation board is much similar hardware as the WIZnet WIZ550web products, it will be to change for purpose.

Typical specifications for the product are as follows.

  • MCU
    • STMicroelectronics, STM32F103RCT6
    • Cortex-M3 up to 72Mhz, 256kB code flash memory, 48kB SRAM
  • Ethernet Controller
    • WIZnet W5500
    • Hardwired TCP/IP chip, High Performance SPI Interface

 

 

Step 3. Used Libraries

WIZnet HTTP Server Library. Please refer to the next link.

https://github.com/Wiznet/HTTPServer_LPC11E36_LPCXpresso

 

 

Step 4. Implemented Web Manager Prototypes

Considered elements to make a Web Manager are as follows.

  • AJAX / Responsive Web
    • Corresponding to the mobile environment
  • S2E Device Status Control / Monitor
  • Real-time Data Transaction Monitoring Chart
  • Configurable I/O Settings
  • Useful Links (FAQ / Wiki / Forum … and Etc.)

S2E_Webmanager_device_settings S2E_Webmanager_mobile S2E_Webmanager_tablet

 

 

Step 5. Plans

  • Real-time Data Transaction Monitoring Chart Page
    • Monitoring result can be deployed to setup initial
      values and debug errors
  • Configurable I/O Settings Page

S2E_Realtime_data_transaction_monitoring_chart_example

Advertisements

Web Manager development for WIZnet Serial to Ethernet modules”에 대한 1개의 생각

답글 남기기

아래 항목을 채우거나 오른쪽 아이콘 중 하나를 클릭하여 로그 인 하세요:

WordPress.com 로고

WordPress.com의 계정을 사용하여 댓글을 남깁니다. 로그아웃 / 변경 )

Twitter 사진

Twitter의 계정을 사용하여 댓글을 남깁니다. 로그아웃 / 변경 )

Facebook 사진

Facebook의 계정을 사용하여 댓글을 남깁니다. 로그아웃 / 변경 )

Google+ photo

Google+의 계정을 사용하여 댓글을 남깁니다. 로그아웃 / 변경 )

%s에 연결하는 중